Exclusive Easter Sale! Hop into savings—up to 40% OFF! Limited time only! 
Creality Spider Speedy Ceramic Hotend
£38.87 Inc. Vat
- High-temperature resistance up to 300°C, compatible with various filaments
- Made with titanium and copper alloys for excellent thermal insulation
- Efficient heating with a cylindrical ceramic heating ring, reaching 200°C in just 40 seconds
- Supports high-speed printing up to 400mm/s with an increased hot melt section
- Lightweight and modular design for easy installation and maintenance
- Compatible with a wide range of Creality 3D printers, including Ender and CR series
- Comes with a hardened steel nozzle (0.4mm) and a copper alloy nozzle (0.8mm)
- Maximum flow rate of 32mm³/s and adjustable retraction distance (up to 5mm)
Product details
Highlights
High-Temperature Resistance Up to 300 Celsius
The heat break is made of titanium and copper alloys which support high-temperature printing at 300 Celsius and is compatible with more filaments. Also, the 0.2mm thin wall thickness for excellent thermal insulation.
High Thermal Conductivity
The cylindrical ceramic heating ring improves heating efficiency and reduces heat loss. With uniform heating and fast heat transfer, it only takes 40 seconds to heat from room temperature to 200 Celsius.
Support 400mm/s High-speed Printing
The overall hot melt section is increased by 30%(The hot melt section length is 27.8mm), and the high-temperature heat-resistant insulation sheet is added to maintain the temperature of the melting section, supporting 400mm/s high-speed printing.
The titanium alloy base is used to reduce the thermal conductivity by 30%, which can reduce the transfer of heat from the heating section to the heat dissipation section and ensure smooth feeding.
Lightweight Design, Easy to Install
The modular standard interface design makes it ready to use without printing the fan shroud. Lightweight design for easy installation and maintenance.
Wide Compatibility
Compatible with Creality Ender-3 Pro/Ender-3/Ender-3 V2/Ender-5/Ender-5 Pro/Ender-5 Plus/Ender-3s/Ender-6/Ender-4/Ender-3 Max/Ender-2 Pro/Ender-2/CR-10S/CR-10/CR-10 S5/CR-10 S4/CR-10Mini/CR-20/CR-20 Pro 3D printers.
Specification
| General | Brand: Creality Type: Hotend Model: Spider Speedy Color: Black |
| Specification | Nozzle: Hardened steel nozzle 0.4mm*1; copper alloy nozzle 0.8mm*1 Compatible with Filament: PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI, etc. Support Filament Diameter: 1.75±0.05mm Retraction Distance: Max 5mm (can be adjusted according to the printing situation) Maximum Flow Rate: 32mm3/s |
| Weight & Size | Package Weight: 150g Package Size(L x W x H): 8.65×5.3×4.75cm |
| Package Contents | 1 x Hotend 1 x User Manual |
Related products
Ne***n –
Great product, easy to set up and prints great so far!
Na***n –
This hotend works well with good construction. Perfect for my 3D printer.
Le***. –
Dies ist das zweite Hot-End-Upgrade, das ich für einen Drucker verwendet habe. Erstaunliche Ergebnisse bisher. Erwärmt sich schneller als das verbesserte Hot-End, das ich verwendet habe.
Lo***i –
Moja drukarka 3D często musiała zmieniać dysze z powodu zatkania, modernizować uchwyty ekstrudera. Ten nowy gorący koniec robi różnicę, pierwsza warstwa wychodzi idealnie za każdym razem!
Ri***. –
Compré este extremo caliente para mi Creality Ender-3 Pro. El producto en sí se ve y se siente muy bien, aunque no se puede ver una vez que está instalado y la cubierta vuelve a estar en su lugar. Justo antes de esto, rompí mi ventilador y tuve que reemplazarlo antes de imprimir algo, así que cuando lo abrí para reemplazar el ventilador, pude alinear la araña y ver que encajaba perfectamente en la boquilla del extremo caliente. Las distancias son aproximadamente las mismas. ¡así que realmente puedo usar el escudo original que imprimí originalmente y los corchetes simples! Con él, lo instalé con el ventilador y la instalación fue simple y directa, no diferente a otros hotends en ese sentido. ¡Hasta ahora imprime bien! ! !
Jo***. –
I have an old 3D printer that has had a lot of modifications and upgrades. Just a while ago I installed a cheap hot end and after a while, the print quality started to degrade. The prints don’t stick, and when they do, the nozzle hits the print and knocks the print loose after a few dozen layers. This is so annoying. Finally, I saw this Creality Spider Speedy ceramic hot end, and after thinking about the price for a few days, I decided to give it a try. I’m so glad I did. My prints have never looked better. The quality has gotten better, not to mention the print speed is almost unbelievable. I have multiple printers and have been printing with various hot ends for many years and this is the best I have owned. So I would recommend it!
ma***o –
thanks, great is the excellent original.