Categories: Rc Vehicles
XLH 9125 RC Car RTR Blue
Rated 0 out of 5
0 Reviews- Dual motor drive for a super-fast dynamic experience
- Innovative enclosed battery cover design for easier battery replacement
- Overheating protection circuit board ensures safety for children
- Features bearing, metal shaft, and driving cup for enhanced durability
- Achieves speeds up to 46km/h with good cornering, powered by a 390 brushed motor
- Large tires enable climbing hills and traversing rugged terrains
- Runs for about 10 minutes on a removable 1600mAh Li-ion battery; charges in approximately 2.5 hours
- 2.4GHz 4CH transmitter provides an R/C range of about 80m
Categories: Rc Vehicles
ZLL SG318 Pro 1/20 2.4G 4WD Brushed RC Car 3 Batteries
Rated 0 out of 5
0 Reviews- ZLL SG318 Pro RC Car features a classic 1/20 design with cool front and rear lights
- Capable of conquering various road conditions due to high toughness anti-collision material
- Offers flexible control and strong power matching for an enhanced driving experience
- Operates on a 2.4G remote control with a long control distance
- Provides a usage time of 33 minutes with a charging time of 110 minutes
- Battery type is a 3.7V 500 mAh with a protection board included
- Product functions include forward, backward, turning, full throttle ratio, 2-speed transmission, and a speed of 20 km/h+
- Package includes the RC car, three batteries, a remote controller, USB charging cable, screwdriver, and user manual
Categories: Consumer Electronics
TWO TREES 300mm*200mm Laser Bed
Rated 0 out of 5
0 Reviews- Compatible with various laser engraving machines for versatile use
- Designed for clean cuts in wood, acrylic, and other materials, minimizing smoke yellowing
- Features an observable cutting design with a metal plate that indicates when cutting is complete
- Equipped with a metal desktop protection board to prevent laser damage to the table
- Constructed from aluminum alloy with high flatness and a solid structure, ensuring durability
- Compact size: 300mm x 200mm x 22mm, and lightweight at 0.85kg for easy handling
- Includes a honeycomb working table, metal plate, and user manual in the package
Categories: Consumer Electronics
Trianglelab 0.6mm Volcano ZSD Diamond Copper Alloy Nozzle
Rated 0 out of 5
0 Reviews- Made from copper alloy with 10 times the thermal conductivity of steel
- Nickel plated surface for low friction, improving plastic flow and print quality
- Features a polycrystalline diamond (PCD) insert with high hardness and wear resistance
- Suitable for printing with carbon fiber, glass fiber, ceramic fiber, and metal powder-filled polymers
- Insert has a thermal conductivity of 700W/(m*K) and a low coefficient of friction (0.2)
- 0.6mm nozzle size compatible with 1.75mm filament diameter
- Lightweight design with a total weight of 3.6g (package weight: 11.6g)
- Comes packaged with a single 3D printer nozzle
Categories: Laser Engravers
AlgoLaser Laser Engraver Raisers 4pcs
Rated 0 out of 5
0 Reviews- Set of 4 laser engraver raisers by AlgoLaser
- Ideal for engraving taller items and compatible with YRR & YRC models
- Suitable for Alpha, Delta, and DIY KIT engraving machines
- Designed to fit laser engravers with metric M6 threaded extensions
- Lightweight at 0.25kg; dimensions are 2.6 x 2.6 x 10.5 cm
- Package dimensions are 28 x 17 x 4 cm, with a total weight of 0.313kg
- Comes with 4 raisers for enhanced engraving versatility
Categories: Consumer Electronics
TWO TREES 300mm*300mm Laser Bed
Rated 0 out of 5
0 Reviews- Necessary accessory for laser cutting wood, acrylic, and other materials
- Produces neat and clean edges without yellowing from smoke
- Features a convenient cutting and observation design with a bright light indicator
- Equipped with a metal desktop protection board to prevent laser damage
- Compatible with various mature laser engraving machines
- Constructed from aluminum alloy with high-precision CNC processing for durability
- Dimensions: 300mm x 300mm x 22mm, with a package weight of 1.2kg
- Includes honeycomb working table, metal plate, and user manual
Categories: 3D Printers & Accessories
FYSETC 3D Printer Accessories
Rated 0 out of 5
0 Reviews- Designed for inserting heat set nuts into 3D printer parts, providing a convenient and affordable solution
- Features a female head design and hand screw knurled joint for easy disassembly and replacement of thread inserts
- Made from brass material for excellent heat conduction and stability during use, preventing nut skew
- Compatible with standard 936 universal soldering iron tips and various threaded knurled nuts (M2 to M8)
- Lightweight at 22g, with a total package weight of 200g and dimensions of 28x10x2 cm
- Package includes 6 threaded inserts and 1 heat set insert tip
Categories: Consumer Electronics
TWO TREES Filament Dryer Box US Plug
Rated 0 out of 5
0 Reviews- Designed to keep 3D printer filaments dry and dehumidified, especially moisture-sensitive types
- Made from high-temperature-resistant material, allows for baking filaments at designated temperatures
- Sealed protection offers comprehensive dust-proofing and prevents impurities
- Compatible with 99% of filaments, including PLA, ABS, PETG, and more
- Max capacity of 200x73mm; supports filament diameters of 1.75mm, 2.85mm, and 3mm
- Rated power of AC 110V, 60Hz with a heater power of 48W
- Lightweight at 0.85kg; compact size of 228x125x242mm
- Package includes one filament dryer box and a user manual
Categories: Consumer Electronics
TriangleLab CHC KIT Ceramic Heating Core
Rated 0 out of 5
0 Reviews- Cylindrical ceramic heaters provide optimized and uniform heating of materials
- Directly installed thermistor in the BLOCK for accurate temperature readings at the hot end
- Lightweight design allows for fast printing capabilities
- Compact size for easy installation and use
- Compatible with various radiators including V5/V6/CR10/HEMERA/MATRIX, with a maximum temperature of 300°C
- Package includes a 12V Ceramic Heating Core, thermistor extension cord, reduced pressure plate, silica gel set, and manual
- Brand: TriangleLab; Model: CHC; Specifications include 10±1Ω resistance at room temperature and compatibility with MKS BASE V1.4 controller board
Categories: Consumer Electronics
Trianglelab Sherpa Extruder Moon MOTOR
Rated 0 out of 5
0 Reviews- Brand: Trianglelab
- Type: Extruder, Model: Sherpa Extruder Moon
- Precision machined gears made by German CNC for durability
- Hardened steel gears enhance smooth filament flow
- Rated voltage of 1.9V DC and rated current of 1A
- Holding torque of 100mNm with two phases on rated current
- Product weight is 85g; package weight is 140g
- Includes user manual in the package
Categories: Consumer Electronics
Phaetus Rapido 2.0 UHF Hotend Blue
Rated 0 out of 5
0 Reviews- High-efficient rectangular ceramic heating unit reaches 200°C in just 35 seconds; maximum printing temperature of 350°C
- Designed for ultra-high speed printing with volumetric flow rates up to 75 mm³/s
- Detachable 104NT temperature sensor allows for high-temperature printing and easy replacement
- Superior thermal isolation in the heatbreak minimizes heat creep and reduces filament clogging risks
- One-handed nozzle change capability with titanium-alloy screws for a rigid coupling
- New assembly method includes a cable tie structure to protect wiring during installation
- Compatible with all thermoplastic filaments, including composite fiber filaments
- Lightweight design at 55g with compact dimensions (23x23x79mm)
Categories: 3D Printers & Accessories
Creativity 24V 3D Printer Extruder Direct Drive Hotend Kit
Rated 0 out of 5
0 Reviews- Brand: Creativity
- Type: Hotend Kit, Model: Ender3 24V
- Features high strength, precision manufacturing, and long life
- Environmentally friendly materials used
- Nozzle size: 0.4mm, Voltage: 24V, Material: Metal
- Compatible with Ender 3, Ender 3S, and Ender 3PRO
- Package includes Titan Extruder, stepper motor, hotend kit, fans, and other components
- Package weight: 0.7kg, dimensions: 20x10x8cm
Categories: Consumer Electronics
Creality Spider Water-Cooled Ceramic Hotend
Rated 0 out of 5
0 Reviews- Water-cooled aluminum alloy heat sink increases heat dissipation efficiency by 30%, preventing clogs
- Cylindrical ceramic heating ring heats up to 200℃ in just 40 seconds for faster printing
- Supports high-speed printing up to 300mm/s with a 30% larger hot melt section
- Titanium and copper alloy heat break allows for high-temperature printing at 300℃ and compatibility with various filaments
- Enhanced durability with a perfectly fitted heat block and heat sink, extending hotend lifespan
- Easy installation and maintenance, compatible with multiple Creality printer models
- Includes a copper alloy nozzle (0.4mm and 0.8mm) and supports a wide range of filament materials
- Lightweight design at 55g, with a compact package size of 8.5 x 5.3 x 4.8 cm
Categories: Consumer Electronics
Trianglelab 0.8mm Volcano ZSD Diamond Copper Alloy Nozzle
Rated 0 out of 5
0 Reviews- Made of copper alloy, providing 10 times the thermal conductivity of steel
- Nickel-plated surface reduces friction, improving molten plastic flow and print quality
- Features a polycrystalline diamond (PCD) insert with high hardness and wear resistance
- Suitable for handling carbon fiber, glass fiber, ceramic fiber, and metal powder-filled polymers
- PCD material offers 30% higher thermal conductivity than pure copper and a low coefficient of friction
- Designed for 3D printers with a 0.8mm nozzle size and compatible with 1.75mm filament diameter
- Product weight is 3.6g; package dimensions are 14cm x 16cm x 10cm
- Includes one 3D printer nozzle per package
Categories: Consumer Electronics
20pcs Mecpow AS02 8*8*1/8 inch Acrylic Sheets
Rated 0 out of 5
0 Reviews- Set includes 20 colorful acrylic sheets in red, green, and yellow
- Each sheet measures 200mm x 200mm (8 inches x 8 inches) and is 3mm (1/8 inch) thick
- Weather-resistant and durable for long-lasting designs
- Comes with scratch-resistant craft paper for protection during transport
- Suitable for various DIY projects like laser engraving, CNC routing, and more
- Total of 10 sheets: 4 red, 3 green, and 3 yellow
- Easy to process and chemically stable for versatile applications
- Product weight is 1.328kg with package weight of 1.35kg
Categories: Consumer Electronics
Trianglelab Rapido Hotend PT1000
Rated 0 out of 5
0 Reviews- One hotend with two configuration options for versatility
- Constructed with a one-piece copper alloy for enhanced thermal conductivity
- Features a thin-walled surgical-grade stainless steel heat breaker and titanium screws for robustness
- Capable of high-speed printing with a flow rate up to 75mm³/s
- High power cylindrical ceramic heating element rated at 115W
- Heats from 24°C to 280°C in less than 51 seconds
- Includes a complete package with various accessories such as nozzles, silicone socks, and screws
- Weighs 52g and has a compact package size of 8x5x13cm
Categories: Consumer Electronics
TWO TREES HGX-LITE Extruder Black
Rated 0 out of 5
0 Reviews- Compatible with CR-10, CR-10S, Ender-2, Ender-3, and Ender-5 series models
- Supports a variety of 1.75mm consumables including PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, and PEI
- All-metal construction enhances grip, reduces slippage, and improves thrust and printing quality
- Made from durable, wear-resistant hardened steel with a nickel-plated gear set
- Lightweight design with aluminum alloy shell for improved transmission ratio and torque
- Package includes one HGX-LITE extruder, two M3x12 screws, and two hexagon bars (2.0/2.5)
- Weighs 0.09kg with package dimensions of 9.2x5.2x3cm
Categories: Consumer Electronics
Creativity MK8 Upgrade Direct Drive Extruder Hotend Kit 12V
Rated 0 out of 5
0 Reviews- Brand: Creativity, Model: MK8-12V, Color: Black
- Designed for stable structure with mature craftsmanship for durability
- Long-lasting and cost-effective performance
- Capable of printing various TPU filaments
- Compatible with CR-10, CR-10S, CR-10S4, and CR-10S5 printers
- Includes 0.4mm nozzle size
- Package weight: 0.75kg; dimensions: 20x10x8cm
- Contents: extruder, 42-34 stepper motor, hotend kit (E3D V6 head), wires, v-slot wheels, backplane, and fans
Categories: Consumer Electronics
Trianglelab TCHC TD6 Model B 24V Hot End
Rated 0 out of 5
0 Reviews- New ceramic ring hot end from Triangle Labs, model TCHC TD6
- Features Trianglelab's innovative TUN one-piece nozzle to prevent material leakage
- High-temperature resistance, compatible with various filaments (PLA, ABS, ASA, PETG, PA, PA+CF)
- Capable of reaching temperatures up to 300 degrees Celsius with high printing accuracy
- 360-degree heating from a ceramic heating ring with a built-in copper plated heating ring
- M6 smooth thread design prevents leaks and integrates tightly with heating components
- Includes a 104GT thermistor and a 50W heater cartridge for enhanced performance
- Package contents: TCHC TD6 heatsink, TUN nozzle (0.4mm), ceramic heating core kit, and silicone sock
Categories: Consumer Electronics
Creality 24V 1.6W Laser Module Control Box Kit US Plug
Rated 0 out of 5
0 Reviews- 0.06mm high precision laser module for detailed engraving
- Compatible with various Creality 3D printer models including Ender and CR series
- Quick calibration with an easy-to-use focusing lens and paddle system
- One-button control for offline operation: preview, engrave/cut, and pause functions
- Supports a range of materials: cardboard, wood, bamboo, rubber, leather, fabric, and plastic
- Capable of cutting 0.05mm balsa wood in one pass
- Includes multiple accessories: control box, goggles, power adapter, and more
- Works with popular laser engraving software: LightBurn and LaserGRBL
Categories: Consumer Electronics
ERYONE Standard PLA Filament Mango Yellow
Rated 0 out of 5
0 Reviews- Brand: ERYONE
- Model: Standard PLA Filament
- Color: Mango Yellow
- Diameter: 1.75±0.03mm with high dimensional accuracy
- Print temperature range: 190-220°C; recommended at 210-220°C
- Heated bed temperature: 55-70°C
- Weight: 1kg
- Features low shrinkage, excellent layer bonding, and easy printing without knotting
Categories: Consumer Electronics
Phaetus Rapido 2 Plus UHF Hotend Black
Rated 0 out of 5
0 Reviews- High-efficiency heating unit with rapid heating to 200°C in just 35 seconds, max printing temperature of 350°C
- Ultra-high speed printing capability with flow rates up to 75 mm³/s for enhanced performance
- Detachable PT1000 temperature sensor, replaceable for high-temperature applications
- Superior thermal isolation of heatbreak to prevent heat creep, reducing filament clogging risk
- One-handed nozzle change feature enabled by low thermal conductivity titanium-alloy screws
- Compatible with a wide range of thermoplastic filaments, including composite fiber types
- Lightweight design at 54.5g, compact size for easy installation and use
- Complete package includes various tools and components for setup and maintenance
Categories: 3D Printers & Accessories
FYSETC StrideMax FD 3D Printer Control Board
Rated 0 out of 5
0 Reviews- Dual-channel TMC5160 control board supporting 48V with CAN/CANFD and USB interfaces
- Compatible with Klipper or RRF for high-speed 3D printing requirements
- Features additional temperature measurement, fan control, I/O expansion, and RGB light strip support
- Supports dual TMC5160 motors with a maximum current of 10A
- Equipped with an RP2040 MCU and DIN mount case ready
- Includes onboard heatsink and additional temperature sensors for each MOSFET array
- Comes with 2 controlled fan outputs, 3 temperature sensor inputs, and 2 I/O ports
- Package includes the StrideMax motherboard, a USB cable, and an accessory package
Categories: Consumer Electronics
TWO TREES HGX-LITE Extruder Silver
Rated 0 out of 5
0 Reviews- Wide compatibility with CR-10, CR-10S, Ender-2, Ender-3, and Ender-5 series models
- Capable of printing various 1.75mm consumables including PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, and PEI
- Features a larger transmission ratio for improved torque and thrust, enhancing printing quality
- Constructed with durable, wear-resistant materials, including a hardened steel nickel-plated gear set
- Lightweight design with an aluminum alloy shell and hardened steel components for greater efficiency
- Package includes one HGX-LITE Extruder, screws, and hexagon bars (motor not included)
- Compact package size of 9.2x5.2x3cm and a total weight of 0.09kg